2004 Toyota Tundra 4.7 Timing Marks

The marks go straight up on each.

2004 toyota tundra 4.7 timing marks. As you apply the belt w the tentioner off the cam marks will move out a hair no longer be ligned up with the marks on the timimg cover backing plate. I believe the timing marks are the same on the 47 engine but on the VVTi you have to line the timing marks up and then turn it a few degrees clockwise to the T mark. The left Cam or driver side rotated counter clockwise I believe.

Posted on Dec 14 2014. PIECES OF THE COVER WERE CAUGHT UNDER IT I WAS WONDERING IF THERE WERE ANY. 3 timing belt cover.

The new OEM Toyota timing belt will come with its own marks on it. Remove crankshaft pulley bolt. For your 2000 Toyota Tundra.

Turn the crankshaft pulley and align its groove with the 0 timing mark of the No. These marks serve as a Poka-yoke so that you cant get the marks lined up wrong. The crank has to be on TDC on compression stroke.

Adjusting No1 Cylinder To TDC Compression Courtesy of TOYOTA MOTOR SALES USA INC. There is another mark that can be seen but just remember we use the T mark for Timing Belt. High so I have a 06 tundra 47 V8 interference motor.

There is another mark that can be seen but just remember we use the T mark for Timing Belt. 1 lower timing belt cover. Turn the camshaft and align the knock pin hole of the camshaft with the timing mark of the No.