2001 Toyota Tundra Removing Upper Ball Joint

3-lower strut mounting bolt.

2001 toyota tundra removing upper ball joint. Normal cause of ball joint failure is for the ball to get LOOSE and need replacement before it pops out. The ball and socket allows your suspension to move at different angles for steering and going over rough. Upper ball joint removal.

Especially designed for heavy-duty wear and tear these ball joints will handle the toughest work you can throw at them and. Tacoma Tundra Ball Joint Removal- Slug Adapter Install Tools. 4-the three upper strut mounting nuts.

Attachment Method Bolt-On 12 Press-In 6 Greaseable No 11 Yes 7 Grease Fitting Included. The 2001 Toyota Tundra has 2 NHTSA complaints for the suspensionfrontcontrol armupper ball joint at 152710 miles average. I replaced the lower ball joints and just need to set the whole assembly back on the truck.

2001 Toyota Tundra Limited 8 Cyl 47L. Remove the ball joint dust boot. 538591Replace the forcing screw in the C-frame with OTC No.

Mine were the originals and had been in there for 7 years. Put the spindle back on using the jack if necessary and put the nut back on and tighten. A ball with a threaded stud a socket and a rubber boot.

1-year TrueDrive unlimited-mileage warranty. Use a 14mm socket to remove the four Ball Joint mounting bolts. I ended up grinding the upper post to of the ball joint off no amount of hammering worked.