2000 Toyota Tundra Wont Shift Out Of Park

When put in gear truck stalls.

2000 toyota tundra wont shift out of park. Once it is open you have access to manually push a little white tab down to release the shift. Stick a pen or something similar straight down the opening and move the shifter out of park. A buddy helped me out said the battery was so dead there wasnt enough juice getting past the battery to.

If the lever will not move after replacing the ignition switch chances are the connector for the shift. Either something caused it to bend or its starting to come loose. Havent had any previous problems with it.

If the cable connecting the shifter handle to the transmission is broken the car will not going into park in fact the shifter will not work at all. I removed the plastic cowling on the top of the steering column and found a loose torks head screw located at about 10 oclock that was loose. I had the same issue.

When trying to boost truck hooked up cables wrong so I checked and changed all blown fuses from fuse panel 1 now the truck starts but I have no power to inside fuse panel and no lights or power inside cab along with not coming out of park. The transmissonwill not shift out of first gear. Remove the shift plate that surrounds the shifter you should b able to just pop it off spray the inside with a solution of detergent and warm water moving the shifter back and forth this should keep the shift interlock from.

Toyota Tundra 2000. Shift lever still stuck. Very common for the wiring to get butchered up if the car was fitted with an.

Compare to Toyota Tundra. The truck runs great but there seems to be an electrical problem. The shift interlock system uses the brake pedal brake light switch and ignition switch as inputs to release the gear selector lever.