2000 Toyota Tundra Trailer Tail Light And Brake Converter

The small grey connector that is attached to the red fuse holder wire on the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part C55367 for a 2000 Toyota Tundra is located in the vehicles engine compartment between the battery and firewall.

2000 toyota tundra trailer tail light and brake converter. Converter converter on certain 2000 model year Tundra and 1999 - 2000 model year Tacoma. CURT 56040 Vehicle-Side Custom 4-Pin Trailer Wiring Harness Fits Select Subaru Ascent Forester Outback Crosstrek XV. 4-flat plus after market ARE.

The brake light switch feeds the trailer converter. CURT 56196 2-to-3-Wire Splice-in Trailer Tail Light Converter for RV Dinghy Towing. If your Toyota Tundra operates on a 3-wire system which means that it has separate brake and turn signals then those signals will need to be combined so that they run on 1 wire to properly activate your trailers tail lights.

Vehicles equipped with a genuine Toyota Trailer Towing Hitch or Bumper Hitch. The black box that you are referring to on the Hopkins Plug-In Simple Wiring Harness 43365 is a tail light converter. Affected part numbers are.

E-mail me PM SENT and ill send you the schematic which has wire colors are locations for the J10 connector. Dont forget to add a bit of Dielectric Grease for Electrical. Everything else seems to work.

2004 Toyota Tundra - Hopkins Active Tail Light Converter with Install Kit. A new larger trailer checked out lights at first but later failed. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Hopkins 46155 4 Flat Universal Towing Connector Kit wconverter independent bulb turn signals from 3399. The trailer dealer checked out the trailer lights. Genuine Unistrut P2750-EG 4 Wheel Light Duty Trolley Assembly for use with P1000 P1001 P5000 P5001 P5500 P5501 and All 1-58 or Taller Strut Channel.