2000 Toyota Tundra Timing Belt Marks
He actually goes to the ATDC mark.
2000 toyota tundra timing belt marks. Other sources claim that. The crank has to be on TDC on compression stroke. Now lets look at setting up the new timing belt.
Also note that Bank 1 is labeled as the L-Cam and Bank 2 is the R-Cam. Used to power the Toyota Tundra Sequoia Land Cruiser and 4Runner in addition to the Lexus GX470 and LX470 this V8 is ridiculously reliable. These marks serve as a Poka-yoke so that you cant get the marks lined up wrong.
The new OEM Toyota timing belt will come with its own marks on it. Also note that Bank 1 is labeled as the L-Cam and Bank 2 is the R-Cam. Posted on Dec 14 2014.
The marks go straight up on each. Click on the following free direct Link. 1 cylinder is at TDCTemporarily install the timing belt tensionerInstall the timing belt over the crankshaft sprocket then inside the idler pulley over the camshaft sprocket and then inside the timing belt tensionerApply tension to the timing belt by turning the tensioner in the clockwise direction so there is no slack in the belt on the tension sideTighten the tensioner.
Put 1 piston up front pass side feel for air pressure coming out with your finger to assure its on compression stroke. The marks go straight up on each. Get a Haynes repair manual.
An expert that has over 500 points. AISIN TKT-021 Engine Timing Belt Kit with Water Pump grey 16627 2 Pack - 10mm ROUND SHAFT FC-280PC-22125 Central Door Lock Actuator Motor ROUND SHAFT Circle Spindle Power Locking Repair Engine Replaces Mabuchi. There is another mark that can be seen but just remember we use the T mark for Timing Belt.